Hallo guy’s, berikut seputar info seputar XSCF. Oracle SUN M-series memiliki  extended System Control Facility (XSCF) firmware baru dengan konsol yang powerful. XSCF memiliki prosesor sendiri untuk memonitor server hardware. Meskipun server sedang down, XSCF akan tetap hidup selama ada power yang terhubung ke server. 

Ketika Anda menjalankan XSCF snapshot, XSCF akan mengumpulkan informasi server secara lengkap tidak dengan domain tertentu yang telah Anda konfigurasi pada server dan tidak akan ada dampak dengan menjalankan snapshot pada machine. The XSCF perintah snapshot yang mengumpulkan setup konfigurasi, lingkungan, log, kesalahan, dan FRU-ID informasi yang diperlukan untuk melakukan diagnosis.

Dalam mengambil snapshot XSCF, login ke server console.
Catatan: Anda harus memiliki hak platadm atau fieldeng  untuk menjalankan snapshot.

Prosedur ini bias dijalankan dissever dibawah ini;

Sun SPARC Enterprise M3000 Server
Sun SPARC Enterprise M4000 Server

Sun SPARC Enterprise M5000 Server
Sun SPARC Enterprise M9000-32 Server
Sun SPARC Enterprise M9000-64 Server

Dari server XSCF prompt, jalankan perintah di bawah ini dan menentukan lokasi server tujuan Anda untuk menyimpan snapshot.

XSCF> snapshot -L F -t [email protected]:/home/maintenance
Downloading Public Key from '172.16.17.29'...
Public Key Fingerprint: 68:5a:d9:02:1b:62:c9:a8:95:1a:52:31:9c:c4:82:b0
Accept this public key (yes/no)? yes
Enter ssh password for user 'admin' on host '172.16.17.29':
Setting up ssh connection to [email protected]
Collecting data into [email protected]:/home/maintenance/myglobal-xscf_2015-01-07T20-30-15.zip
Data collection complete
XSCF> exit

Dengan asumsi;
Host tujuan dimana akan disave file snapshot : 172.16.17.29
menggunakan user : admin
directory penyimpanan : /home/maintenance


Leave a Reply

Your email address will not be published. Required fields are marked *

sixteen + 12 =

Related Posts

Oracle

How to Collect a Snapshot on SPARC M series servers Mx000 and M10-x systems

Running snapshot The syntax varies slightly from the Mx000 to the M10-x .The M10 requires a “-a” option to collect logs from all chassis. The two most common usages are described below. The first example Read more…

Oracle

Verifying HBA card connectivity in Solaris

1. Use the “luxadm -e port” command to verify HBA has established communication with a node. # luxadm -e port /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected]/[email protected],0:devctl CONNECTED /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected],1/[email protected],0:devctl CONNECTED CONNECTED : HBA has established connection with either target or initiator. Read more…

Oracle

Setting Network IPMP & Aggregate Solaris 11

Configure an Active-Standby IPMP Group 1. Create an IPMP interface ipadm create-ip net0 ipadm create-ip net1 ipadm create-ipmp ipmp0 2. Add the physical interfaces net0 and net1 to the ipmp group. ipadm add-ipmp -i net0 Read more…