Running snapshot The syntax varies slightly from the Mx000 to the M10-x .The M10 requires a “-a” option to collect logs from all chassis. The two most common usages are described below. The first example Read more…
1. Use the “luxadm -e port” command to verify HBA has established communication with a node. # luxadm -e port /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected]/[email protected],0:devctl CONNECTED /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected],1/[email protected],0:devctl CONNECTED CONNECTED : HBA has established connection with either target or initiator. Read more…
Configure an Active-Standby IPMP Group 1. Create an IPMP interface ipadm create-ip net0 ipadm create-ip net1 ipadm create-ipmp ipmp0 2. Add the physical interfaces net0 and net1 to the ipmp group. ipadm add-ipmp -i net0 Read more…
Reaching the ok Prompt There are several ways to reach the ok prompt, depending on the state of the system and the means by which you are accessing the system console. In decreasing order of desirability, the list is Read more…
Hi Guys, here’s a little explanation about the structure of the file system on solaris; 1. / – Root Every single file and directory starts from the root directory. Only root user has write privilege under Read more…
Removing a Hard Drive If you are removing a hard drive while the operating system is still running, you must remove the drive logically from the operating system before physically removing it from the server. Read more…
Setup the primary domain Setup the primary domain with necessary resources and services and reboot the machine, for configuration changes to take effect. Create default services primary# ldm add-vcc port-range=5000-5100 primary-vcc0 primary primary# ldm add-vds Read more…
Saving LDOM configuration To save constraints of a single domain : # ldm list-constraints -x ldom_name > ldom_name.xml To save constraints of all the domains : # ldm list-constraints -x > all_ldoms.xml Restoring LDOM configuration Read more…
Types of logical domains Name Purpose Guest No direct access to underlying hardware and does not provide virtual device or services to other ldoms. Uses virtual device. I/O has direct access to underlying hardware in Read more…
1. Log in to the ILOM web interface as Administrator. 2. Select Maintenance –> Firmware Upgrade. The Firmware Upgrade page appears. Graphic Showing Firmware Upgrade Page Picture 1_Firmware Upgrade Page 3. Click Enter Upgrade Mode. A Read more…