Jumpstart bisanya digunakan untuk melakukan installasi Solaris dengan menggunakan media network (over network), berikut cara untuk setting server untuk jump start;

1. Create directory mkdir /export/install/

2. cd sol_10_910_sparc/Solaris_10/Tools/

bash-3.00# cd sol_10_910_sparc/Solaris_10/Tools/
bash-3.00# ls
add_install_client    dial                  rm_install_client
Boot                  Installers            setup_install_server
bash-3.00# ./setup_install_server /export/install/

3.buat folder lagi di /export/config/mgs
mgs = nama server nya

4 create rules
vi rules

any     –       –       profile1        –

nama profile1 harus sesuai dengan nama file /export/config/mgs

5. Create profile1
bash-3.00# cat profile1
install_type    initial_install
system_type     standalone
partitioning    explicit
filesys         c0t0d0s0        20480   /
filesys         c0t0d0s1        98304   swap
filesys         c0t0d0s3        20480   /var
filesys         c0t0d0s5        512     /globaldevices
filesys         c0t0d0s7        128
cluster         SUNWCXall

6. Create sysidcfg
bash-3.00# cat /jumpstart/config/mgs/sysidcfg
network_interface=primary{ip_address=192.168.46.11
        protocol_ipv6=no
        netmask=255.255.255.0
        default_route=NONE}
security_policy=none
terminal=vt100
name_service=none
timezone=Asia/Jakarta
root_password=jh3gxTu710YQg
system_locale=C

# root password diambil dari /etc/shadow

7. copy /export/install/Solaris_10/Misc/jumpstart_sample/check

8. edit vi /etc/ethers

0:14:4f:e7:28:18        IXP-SVR

berisi hostname dan macaddress dari server yang dituju

9. edit vi /etc/hosts
bash-3.00# cat /etc/hosts
#
# Internet host table
#
::1     localhost
127.0.0.1       localhost
192.168.68.180  solaris
192.168.68.181  IXP-SVR

10. jalankan ./check

11. jalanin add install client
./add_install_client -e 0:21:28:a4:86:48 -i 192.168.37.11 -s solaris:/jumpstart/install/Sol-U7 -c solaris:/jumpstart/config/mgs -p solaris:/jumpstart/config/mgs soetha-node1 sun4u
                                 ( Source Image………………)    (……Source sysidcfg…….)   (……Source rules……..)   (Nama domain server yang dituju)   

solaris=nama dari server jumpstart

11. Masuk kedalam console
console (ALOM SC)
console -d 0 -y (XSCF)

   

Categories: SolarisSolaris 10

Leave a Reply

Your email address will not be published. Required fields are marked *

3 × five =

Related Posts

Solaris

How to Find and Remove Old or Inactive Files

How to Find and Remove Old or Inactive Files Become an administrator. Find files that have not been accessed for a specified number of days and list them in a file. # find directory -type Read more…

Oracle

How to Collect a Snapshot on SPARC M series servers Mx000 and M10-x systems

Running snapshot The syntax varies slightly from the Mx000 to the M10-x .The M10 requires a “-a” option to collect logs from all chassis. The two most common usages are described below. The first example Read more…

Oracle

Verifying HBA card connectivity in Solaris

1. Use the “luxadm -e port” command to verify HBA has established communication with a node. # luxadm -e port /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected]/[email protected],0:devctl CONNECTED /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected],1/[email protected],0:devctl CONNECTED CONNECTED : HBA has established connection with either target or initiator. Read more…