Hallo guy’s, sebelumnya ada yang sudah tau zone di solaris 10 itu apa ??
Zone di solaris 10 itu sama kaya virtual yang memanfaatkan resource hardware dengan sifat yang sama seperti virtual lainnya (encapsulation) terpisah dengan resource host (global zone).
Langsung aja ya ke proses step by step install zone di solaris 10;

1. Extrac file  V24150-01.zip (unzip)

[email protected] # cd solarislegacycontainers/
[email protected] # ls
1.0     1.0.1   README

2. Add Package di versi 1.0.1

pkgadd -d . SUNWs8brandk # (.) install dari directory itu sendiri

Processing package instance <SUNWs8brandk> from </source/solarislegacycontainers/1.0.1/Product>

Solaris 8 Containers: solaris8 brand support RTU(sparc) 11.10.0,REV=2008.
Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Using </> as the package base directory.
## Processing package information.
## Processing system information.
   8 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.

The following files are already installed on the system and are being
used by another package:

Do you want to install these conflicting files [y,n,?,q] y
## Checking for setuid/setgid programs.

Installing Solaris 8 Containers: solaris8 brand support RTU as <SUNWs8brandk>

## Installing part 1 of 1.
[ verifying class <none> ]
Installation of <SUNWs8brandk> was successful.

3. Cek status pake yang telah di install

[email protected] # pkginfo | grep "Solaris 8"
system      FJSVs8brandr                     FUJITSU Solaris 8 Containers: solaris8 brand support (Root)
system      SUNWs8brandk                     Solaris 8 Containers: solaris8 brand support RTU
system      SUNWs8brandr                     Solaris 8 Containers: solaris8 brand support (Root)
system      SUNWs8brandu                     Solaris 8 Containers: solaris8 brand support (Usr)

4. Upload file container di zones, kemudian di extract

# gzcat pegasus-appsvr.tar.gz | tar -xf -

5. Create zones

zonecfg -z nama_zones
nama zone : pegasus-appsvr

6. Configure zone

- create -t SUNWsolaris8
- set zonepath = /zones/pegasus-appsvr
- set ip-type = exclusive
- set autoboot = false
- info
- commit
- exit

7. Check zones

# zoneadm list -vc

8. Attach Zoning yang sudah ada

zoneadm -z namazone attach -u

9. Boot Zone

zoneadm -z namazone boot

10. Shutdown Zone

zoneadm -z namazone halt

11. Login ke zone

zlogin -C namazone

12. Uninstall Zone

zoneadm -z namazone uninstall

13. Delete config Zone

zonecfg -z namazone delete

14. Attach backup  Zone

zoneadm -z namazone attach -u

15. Create Big  Zone

# zonecfg -z big-zone
big-zone: No such zone configured
Use 'create' to begin configuring a new zone.
zonecfg:big-zone> create -b
zonecfg:big-zone> set autoboot=true
zonecfg:big-zone> set zonepath=/export/big-zone
zonecfg:big-zone> add net
zonecfg:big-zone:net> set address=
zonecfg:big-zone:net> set physical=hme0
zonecfg:big-zone:net> end
zonecfg:big-zone> info
zonepath: /export/big-zone
autoboot: true
        physical: hme0
zonecfg:big-zone> verify
zonecfg:big-zone> commit
zonecfg:big-zone> exit

1 Comment

Kristian Dyanto · 05/01/2015 at 17:26

Manstab gan :D,

Thanks inponya…

Leave a Reply

Your email address will not be published. Required fields are marked *

14 + thirteen =

Related Posts


How to Find and Remove Old or Inactive Files

How to Find and Remove Old or Inactive Files Become an administrator. Find files that have not been accessed for a specified number of days and list them in a file. # find directory -type Read more…


How to Collect a Snapshot on SPARC M series servers Mx000 and M10-x systems

Running snapshot The syntax varies slightly from the Mx000 to the M10-x .The M10 requires a “-a” option to collect logs from all chassis. The two most common usages are described below. The first example Read more…


Verifying HBA card connectivity in Solaris

1. Use the “luxadm -e port” command to verify HBA has established communication with a node. # luxadm -e port /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected]/[email protected],0:devctl CONNECTED /devices/[email protected]/[email protected]/[email protected]/[email protected]/SUNW,[email protected],1/[email protected],0:devctl CONNECTED CONNECTED : HBA has established connection with either target or initiator. Read more…